- This topic has 11 replies, 5 voices, and was last updated 8 years, 1 month ago by
.
Viewing 12 posts - 1 through 12 (of 12 total)
-
Posts
-
I have a issue, the drip feed still doesn't work. I have setted the drip feed inside the course. I have setted the drip feed in Wplms settings option. And inside the unit I setted the date and time for the unit to be displayed. The unit have been locked but after the time for the unit to be displayed, but still blocked.Its working fine at our end. Please make sure the drip field settings are correct, and the correct timezone is chosen in the wp-admin->settings->general->timezone, refer: http://prntscr.com/a2n3kmSo, but I am from Brazil, and I am using timezone as utc-3. Has any difference between utc+0 to utc-3? ThenksI tested like your screen, but the issue is the same. The unit is locked, but after the date and time be released the unit still locked. Below the screen of my settings.If you need to see the aplication. <span style="line-height: 1.5;">http://ead.m3.org.br/</span> User: admin Pass: tekY70894Rbi have the same issue https://wplms.io/support/forums/topic/dont-work-unit-start-date-and-time-in-course-drip-feed/ Latiyan, please test it again@selmaandrade : Please disable "Section DRip" and "Unit duration" drip. These settings are global and would cause an extra burden on drip calculation. You just need to make sure the Drip is enabled in Course settings and keep it static at any time interval as unit time would overwrite it. Also if you want the exact time then set the timezone as UTC-3 (for brazil). Let me know if this helps.I tested like your tutorial above, but issue still happening. This print screen show my settings [caption id="" align="alignnone" width="632"]
Unit date and time[/caption]
[caption id="" align="alignnone" width="1278"]
Unit Error[/caption]
Please share the admin credentials with us to check the issue on your site. PS:Please mark your reply as private while sharing the admin credentials.Please make sure that you do not enable the drip in between the student is pursuing the course . Drip must be enabled initially in the course when no user have started the course . If drip is applied after any student have started the course and pursuing it then course will show the same error as you were getting "Unit cannot be accessed" (coz drip was enabled after ) . Also the section drip feed overwrites all the drips as of now . So please disable the section drip feed in course if you wan to use the start date time in unit . Please check the video : http://screencast-o-matic.com/watch/cDnFlv1n5e We will fix this so that the unit start date time drip will overwrite the section drips also in the upcoming updates of vibe course module plugin .
Viewing 12 posts - 1 through 12 (of 12 total)
- The topic ‘The drip feed still doesn't work.’ is closed to new replies.