Home › Forums › Legacy Support › Support queries › How-to & Troubleshooting › Unable to finish course
Tagged: Hide "Finish Course" until pass last quiz, PASS & FAIL in student Profile is not working correctly, Unable to finish course
- This topic has 7 replies, 2 voices, and was last updated 7 years, 11 months ago by H.K. Latiyan.
Viewing 8 posts - 1 through 8 (of 8 total)
-
AuthorPosts
-
May 21, 2016 at 6:07 pm #49567squallhajimeSpectatorHi Support, Frank Lim have completed the quiz with 100 marks. But there is no finish course button appearing and in the profile it is showing result failed. FYI, setting of In-Course Quiz is disabled and I am using the following two code https://wplms.io/support/knowledge-base/hide-finish-course-button-until-student-finishes-the-last-unitquiz/ https://wplms.io/support/forums/topic/pass-fail-labels/ Please advise on the finish course button and the result issue. Thanks and Regards.May 21, 2016 at 6:08 pm #49571squallhajimeSpectatorURL: http://learning.sunnytay.com Admin Username: test Password: test@112233May 22, 2016 at 6:31 am #49621squallhajimeSpectatorHi Support, How can I hide "Finish Course" button until the last quiz has passed. Please advise thanks and regardsMay 22, 2016 at 6:31 am #49593squallhajimeSpectatorHi Support, The Frank Lim has passed the quiz shown in attachment pass1 & pass2. However, in his profile it is showing "Fail", as shown in attachment fail1. Please check and advise. Thanks and RegardsMay 22, 2016 at 6:52 am #49598squallhajimeSpectatorURL: http://learning.sunnytay.com Admin Username: test Password: test@112233May 22, 2016 at 2:52 pm #49623squallhajimeSpectatorurl: http://learning.sunnytay.com/course/effective-supply-chain-practices/ Admin Username: test Password: test@112233May 23, 2016 at 9:59 am #49746H.K. LatiyanParticipantI have merged your three topics because all are related to each other. Please do not create unnecessary duplicate topics.May 23, 2016 at 10:06 am #49747H.K. LatiyanParticipant1) The tip for hiding the finish course button is dependent on the course progress. Please check if the course progress is 100% or not, when course progress reaches to 100% the finish course button will appear. 2) For this you are already using the tip and it depends on the course progress. 3) This is also an unnecessary duplicate topic, already replied here: https://wplms.io/support/forums/topic/pass-fail-labels/
-
AuthorPosts
Viewing 8 posts - 1 through 8 (of 8 total)
- The topic ‘Unable to finish course’ is closed to new replies.